MOBILE / STATIONARY DUST EXTRACTOR OR CENTRAL EXTRACTION SYSTEM
DECENTRALISED OR CENTRAL EXTRACTION SYSTEM?
Often the question arises as to whether a mobile or stationary dust extractor or a central extraction system should be used.
It is important to us to find an optimal solution tailored to your needs. In many cases, a mobile, stationary or central extraction system is even mandatory due to required test certificates or specific properties. This applies, for example, is in the scope of application of the DGUV Rule 109-001, grinding, brushing and polishing of aluminium. Usually, instead of dry separators, tested wet dust extractors of the NA K series from our product portfolio are used here. In addition, we take into account the local conditions as well as your individual wishes. Structural conditions can also be a decisive factor in choosing the right extraction system.
In order to make the right decision, you should know the characteristics of mobile, stationary or central extraction systems.
MOBILE AND STATIONARY DUST EXTRACTORS
WHEN DO I NEED A MOBILE OR STATIONARY EXTRACTION SYSTEM?
The following characteristics apply to mobile and stationary dust extractors:
- Flexibility: Use in different, changing or widely separated workplaces
- Compact size: Can be used as a single-point solution or small multi-point extraction
- Low installation costs: set up, connect, get started
- Low investment volume: suitable for companies with few extraction workstations
- Space-saving
- Use in recirculation mode: low piping costs, flexible deployment. The filtered air is mainly returned to the workroom ( recirculation mode ).
- Suitable for extraction of hazardous dusts: test certificate of dust class H and special ATEX versions available
SUITABLE PRODUCTS
DUSTOMAT DRY
The compact dust extractors of the DUSTOMAT DRY series are suitable for almost all applications due to their versatile configurations. Extraction of dry and free-flowing dusts and chips.
Productdetails
Dustomat 4
Energy-efficient all-rounder: Can be used as a mobile dust extractor for dust and shavings or as a welding fume filter for welding fume.
Productdetails
DUSTOMAT 10
Mobile dust extractor for single workstation extraction of dust and shavings on machines and handwork stations.
Productdetails
DUSTOMAT 16M
Mobile dust extractor for extraction of different dusts, such as mineral dusts.
Productdetails
CENTRAL EXTRACTION SYSTEM
WHEN DO I NEED A CENTRAL EXTRACTION SYSTEM?
For central extraction systems, the following characteristics apply:
- An extraction unit that extracts at several points at the same time
- Modular retrofit possible: adapts to individual requirements. Suitable for a larger number of workplaces or areas of application
- Comparatively lower investment volume compared to single user solutions, if extraction is needed at many workstations simultaneously
- Can be used in recirculation and / or exhaust air mode
SUITABLE PRODUCTS
DUSTOMAT HYDRO
Energy-efficient wet separator ideal for welding fumes as well as metal dusts and work processes with flying sparks.
Productdetails
DUSTMAC P series
Cartridge filter systems for extraction of dry, granulated and non-explosive dusts.
Productdetails
WELDEX FE
Modular welding fume filter system for large volumes of air up to 120,000 m³ / h.
ProductdetailsINDIVIDUAL EXTRACTION SOLUTION
Both solutions offer advantages that must be defined individually for the customer. It is always important to make a decision that offers the customer the best solution according to his individual circumstances and requirements in terms of extraction technology. The principle is: optimal success for the customer with the best price and performance ratio.
As a specialist in extraction systems, we are pleased to advise you with our experience of more than 45 years, and develop with you the optimal extraction solution for your application. Just contact us!
CONTACT
WE ARE HAPPY TO PROVIDE A PERSONAL CONSULTATION
We can adapt our exhaust installations to your needs. Tailor-made, modular and individual. Ask us!